Family-owned, licensed & insured. Free in-home estimates in Arlington and nearby cities. Call (817) 555-0123
Hardwood Floor Installation · Kennedale, TX
Kennedale hardwood floors planned around the slab underneath and the size of the house, with moisture readings taken before a single box of wood is delivered.
Family-owned · Licensed & insured, Lic. #238190 · Financing available
In Kennedale, hardwood floor installation often means working in a fairly young house, since about three in ten homes in town went up in the 2010s. A newer slab home takes wood well, but the concrete has to be dry enough, and a large open plan needs a layout that gives the boards room to move.
Our main hardwood floor installation page walks through species, board construction and each installation step. Below is what tends to be different in Kennedale houses.
Kennedale added houses quickly in the 2010s. Census estimates count about 1,050 homes in the city built between 2010 and 2019, close to 30 percent of its housing and roughly double the share for Tarrant County as a whole (American Community Survey, 2020 to 2024). Building has not stopped: the city's 2026 budget lists new single-family homes in the Moderno Addition on S New Hope Rd and at Russell Ranch. Practically every one of them is a slab home. That rules out nailing solid boards straight to the ground floor, so engineered planks are usually the better choice there, glued to the concrete or floated on a moisture barrier.
Slab age matters. Fresh concrete keeps releasing moisture for months after it is poured, and wood glued to a slab that is still drying can cup. We test the concrete with in-place relative humidity probes before ordering. House size matters too. About 38 percent of Kennedale homes have four or more bedrooms, and the city's code sets a 1,500 square foot minimum for houses in its larger-lot districts. Long runs of wood need expansion space at the walls and, in very wide rooms, a maker-approved break, so we plan transitions on paper first.
Every Kennedale hardwood quote is written and itemized, so you can see what each part of the job costs:
Why choose us
30%
of Kennedale homes built 2010 to 2019 (ACS 2020-2024)
A house from the 2010s can look move-in ready and still have a slab that gives off more moisture than a wood floor will tolerate. We set relative humidity probes under ASTM F2170, wait for stable readings and compare them with the flooring maker's limit. If the numbers run high, we talk through a moisture barrier or a different product before you buy anything.
1,500 sq ft
minimum house size in Kennedale's AG, R-1 and R-2 zoning
Bigger houses mean longer halls, more doorways and more places where boards change direction. We sketch the run of the boards through the whole level, mark where transitions and expansion breaks go and order the wood from one production lot, so color and grain stay consistent from the front door to the back bedroom.
60-80°F
indoor temperature range NWFA guidance gives for wood
Wood should go down in a house that is already heated or cooled the way you live in it, which NWFA guidance puts at roughly 60 to 80 degrees. On a new build or a house that sat empty after closing, we ask that the heating and air run for several days first, then let the boards acclimate inside before we install them.
Free estimate
We come to you anywhere in Kennedale, measure, test the subfloor and leave a written, itemized quote.
Mon to Fri 7 AM to 6 PM · Saturday 8 AM to 2 PM · Financing available
FAQ
It depends on the slab more than the calendar. Concrete poured a few months ago may still be releasing too much moisture for glue-down wood. We test it at the free estimate, and if readings are high, we can suggest a floating engineered floor over a moisture barrier, or a short wait and a retest.
Sometimes. If the builder used a prefinished product that is still made, we can often find it from box labels or a sample board. If it has been discontinued, running one new floor through the whole connected area usually looks better than a patch that is close but not exact.
More in Kennedale
Vinyl plank for Kennedale kitchens, living areas and back entries, chosen for the household's pets and traffic and laid over a slab that has been tested first.
Laminate across Kennedale bedroom wings, halls and living areas, with an abrasion rating and pad picked room by room and the slab corrected before planks go down.
Kennedale kitchens, baths and open living areas tiled in porcelain or ceramic, with cracks mapped, joints planned and mortar matched to the tile.
Replacement carpet and cushion for Kennedale bedrooms, game rooms and staircases, ordered from one dye lot and stretched tight enough to stay flat.
Coatings for Kennedale attached garages, detached shops and outbuildings, with each slab tested and diamond ground and a system picked for what the building holds.
Kennedale wood floors brought back by full sanding or a screen and recoat, whether it is postwar oak under old carpet or a prefinished floor from the 2010s.
Also serving
Solid and engineered oak, hickory and maple, installed over slab or wood subfloor with moisture testing first.
Solid and engineered hardwood for Grand Prairie homes of every age, with the slab or subfloor tested and the installation method chosen before any wood is delivered.
Engineered and solid hardwood for Mansfield homes, most of them built since 2000, with the slab tested and the fastening method planned around how the house was built.
Engineered and solid hardwood for Euless houses and townhomes, with the slab tested and the fastening method chosen before any wood is ordered.
Engineered and solid hardwood for Bedford homes, installed after the old parquet, vinyl or carpet comes up and the slab underneath has been checked and prepared.
Engineered or solid hardwood for established Hurst homes, planned around the slab, the door heights and any original oak already in the house.
Service area
Free in-home estimates anywhere in Kennedale. Call (817) 555-0123 to book a visit.
Call for a free in-home estimate anywhere in Kennedale. Financing available on approved credit.
Call (817) 555-0123Mon to Fri 7 AM to 6 PM · Saturday 8 AM to 2 PM · Licensed & insured, Lic. #238190
