Family-owned, licensed & insured. Free in-home estimates in Arlington and nearby cities. Call (817) 555-0123
Hardwood Floor Installation · Hurst, TX
Engineered or solid hardwood for established Hurst homes, planned around the slab, the door heights and any original oak already in the house.
Family-owned · Licensed & insured, Lic. #238190 · Financing available
Most hardwood floor installation in Hurst happens in houses that have already been through two or three rounds of flooring. The city reports it is about 99 percent developed, so a new wood floor usually replaces carpet in a 1970s living room, butts up against old kitchen tile and runs down a hall toward bedrooms that may still have their original oak.
For wood species, nail-down versus glue-down and what drives the price, read our main hardwood floor installation page. The notes here are about Hurst houses in particular.
Census estimates put the median Hurst home's construction year at 1975, and about 60 percent of the city's housing went up before 1980 (American Community Survey, 2020 to 2024). The 1970s were the busiest decade, with roughly 3,700 of today's homes built then. A house from that era is most likely on a concrete slab close to 50 years old, and the slab sets the plan. On concrete we usually recommend engineered hardwood, glued down or floated, after a moisture test and a flatness check, since an older slab often carries patched plumbing trenches and hairline cracks from the clay below.
Height is the other thing we measure closely. Engineered planks plus adhesive or underlayment can sit higher than the carpet they replace, so we check every spot where the new floor meets kitchen tile, a fireplace hearth or an exterior threshold, and we undercut door jambs so doors still swing freely. Some older Hurst homes still have oak strip floors in the bedrooms. In those houses we match species and board width as closely as we can and often suggest refinishing the old rooms during the same visit, so stain and sheen line up from room to room.
Our hardwood page linked above walks through each step in order. For a Hurst home, the written quote typically covers:
Why choose us
1975
median year built, Hurst homes (ACS 2020-2024)
A Hurst house built around 1975 has usually been remodeled more than once. Old thinset, sheet vinyl glue and a raised entry are common finds when carpet comes up. We lift a corner of the existing floor during the estimate to see what is underneath, and the quote lists the removal and slab prep we expect instead of leaving them as surprises.
60-80°F
indoor temperature range NWFA guidance gives for wood
Wood should go in at the temperature the house will normally hold, and NWFA guidance puts that at roughly 60 to 80 degrees for most floors. A Hurst home left empty during a sale can drift far outside it. We ask you to run the A/C or heat at normal settings for several days, then meter the wood and the slab before work begins.
Financing
available, with a written itemized quote
Hardwood is a bigger purchase than most flooring, so you can spread the cost through our financing. Your quote separates wood, adhesive, removal, slab prep and trim, so you can compare it line by line. Our family-owned crew holds License #238190, carries full insurance and brings more than 5 years of professional flooring work to your home.
Free estimate
We come to you anywhere in Hurst, measure, test the subfloor and leave a written, itemized quote.
Mon to Fri 7 AM to 6 PM · Saturday 8 AM to 2 PM · Financing available
FAQ
It can come close. Many mid-century floors are red or white oak strip, and new boards of the same species and width can be stained to blend. Wood that has aged for decades rarely matches a fresh board exactly, so the most even result comes from refinishing the old rooms at the same time the new floor is finished.
All of it. We work on both sides of Airport Freeway (SH 121 and SH 183), from the area around North East Mall near Loop 820 to the streets near L.D. Bell High School on Brown Trail. Estimates are free and done in person, since we need to see the slab and every transition.
More in Hurst
Vinyl plank for Hurst homes and rental units, floated or glued down, with the slab tested and any old sheet vinyl or mastic checked before removal.
Laminate planks for Hurst dens, halls and bedrooms, floated over a slab that has been cleared of old glue, tested and flattened first.
New porcelain or ceramic tile for Hurst kitchens and baths, often after the old tile and mortar come out and the slab's cracks are mapped and treated.
Carpet and cushion for Hurst bedrooms, dens and rental units, laid over sound tack strip and power-stretched so it stays flat.
Garage, patio and shop floor coatings in Hurst, with old paint and oil ground out of the slab and a UV-stable topcoat wherever the sun can reach.
Oak found under old carpet in Hurst homes, repaired, sanded and refinished, with the remaining wood measured before any sanding starts.
Also serving
Solid and engineered oak, hickory and maple, installed over slab or wood subfloor with moisture testing first.
Solid and engineered hardwood for Grand Prairie homes of every age, with the slab or subfloor tested and the installation method chosen before any wood is delivered.
Engineered and solid hardwood for Mansfield homes, most of them built since 2000, with the slab tested and the fastening method planned around how the house was built.
Engineered and solid hardwood for Euless houses and townhomes, with the slab tested and the fastening method chosen before any wood is ordered.
Engineered and solid hardwood for Bedford homes, installed after the old parquet, vinyl or carpet comes up and the slab underneath has been checked and prepared.
Kennedale hardwood floors planned around the slab underneath and the size of the house, with moisture readings taken before a single box of wood is delivered.
Service area
Free in-home estimates anywhere in Hurst. Call (817) 555-0123 to book a visit.
Call for a free in-home estimate anywhere in Hurst. Financing available on approved credit.
Call (817) 555-0123Mon to Fri 7 AM to 6 PM · Saturday 8 AM to 2 PM · Licensed & insured, Lic. #238190
